Х-ка 2This tester has been designed to easily and quickly verify the correct pin out configuration.
Х-ка 3Cables that can be tested: USB (A/A, A/B), BNC 10-100-1000Base-TX, Coaxial, RJ45, RJ11/RJ12 (adapters added and hidden in the place for the battery).
28,33 €
Lanberg cable tester for wiring terminated with RJ-45
Х-ка 2Lanberg’s cable tester with identifier of cable pairs NT-0501 is a multifunctional device for scanning and testing cables of ICT networks.
Х-ка 3It helps significantly save time in searching and verifying pairs wire networks and electric wires.
Х-ка 4The device locates, verifies the connection and detects any problems such as short circuits or incorrect cable pair connections. With the use of this particular Laberg’s device users can detect wires in most types of support terminals.
Х-ка 2Universal 2in1 crimping tool and cable tester.
Х-ка 3This professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;
Х-ка 2This particular set of Lanberg's tools for creating / building/testing a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire and verify ICT (telecommunication) cables for their network.
Х-ка 3Universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4Universal stripping tool for UTP/STP network cables: NT-0102.
Х-ка 5Cable tester for ICT wires with RJ-45, RJ-11 connectors: NT-0402.
37,75 €
Lanberg network toolkit with RJ45 RJ11 cable tester
Х-ка 2Lanberg’s universal network tool case is intended as an inseparable element of work of every network installer, whose daily routine includes managing, adjustment and preparation of telecommunication and ICT cables.
Х-ка 3Every single network tool which a part of this set is, can be stored inside of Lanberg’s convenient tool case, provided with this product bundle.
Х-ка 4Insertion tool for LSA connections, also known as punch tool for Krone IDC 110 connectors
Х-ка 5Stripping tool for network and telephone cables such as: UTP, FTP, SFTP LAN cables, coaxial etc.
29,15 €
Lanberg network tool case w. network tools and tester
Х-ка 2This particular set of Lanberg's tools for creating / building a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire ICT (telecommunication) cables for the purposes of their network.
Х-ка 3Lanberg’s universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4Lanberg’s universal stripping tool for cables: NT-0103.
Х-ка 5RJ-45 UTP connectors.
17,14 €
Lanberg crimping toolkit with RJ45 connectors RJ45 shielded and unshielded
Х-ка 2Lanberg’s network cable tester is a multifunctional device for testing cables of ICT networks. The device is an indispensable tool for every installer and significantly helps to save time in verifying network wire pairs.
Х-ка 3With the help of this tool you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 plugs or wires terminated with coaxial plug.
Х-ка 4Cable tester equipped with RJ-45, RJ-12/RJ-11, and the coaxial connectors LEDs with power switch.
Х-ка 5Terminator (attachment) equipped with RJ-45 and RJ-12/RJ-11 connectors LEDs.
Х-ка 2Lanberg’s network cable tester is a multifunctional device for testing wires of ICT networks.
Х-ка 3With the help of this tool, you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 connectors.
Х-ка 4Product’s main application is to measure the continuity of LAN cabling and verification of connections along with the detection of possible problems with cabling, such as short-circuits or incorrect pairings of wire.
Х-ка 5This particular device consists of two parts, each of them should be fixed correctly at the right ends of the tested cable.
12,49 €
Lanberg cable tester for wiring terminated with RJ-45
Х-ка 2Lanberg’s crimping tool NT-0201 is an essential product intended for installer, who has, on a daily basis, contact with the ICT and telecommunications network cabling.
Х-ка 3This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-9, RJ-11, RJ-12 and RJ-45.
Х-ка 4On top of that, this convenient tool has a built-in additional insulation puller intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 2Lanberg’s crimping tool NT-0202 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring.
Х-ка 3This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45.
Х-ка 4On top of that, this convenient tool has a built-in additional insulation stripper intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 5Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented.
9,13 €
Lanberg universal crimping tool for wires terminated with RJ11/12/45 connector
Х-ка 2Used for crimping/terminating network cables in accordance with LSA technology, used in practice, to perform the cable terminations for the purposes of flush and surface mount data boxes, ICT surface boxes, patch panels and many other devices.
Х-ка 3The device is ideally suited for LSA sockets used in xDSL and ISDN networks, as well as, for the cables with LSA connectors and blocks of telephone connector panels.
Х-ка 4Due to the fact, that a single wire cannot be in insulation, the LSA technique of stripping the insulation eliminates this particular problem, which translates to the practical use of this product.
Х-ка 5Allows connection of cables with a diameter of: 0.35mm ~ 0.9mm and 0.7mm - 2.6mm.
Х-ка 2Lanberg’s stripping tool NT-0101 is a universal device intended for all cable installers, with broad scope of applications, such as traditional electronic workshops or professional installation sites.
Х-ка 3This particular product is dedicated to stripping the external insulation or cutting cabling such as ethernet (UTP, FTP, SFTP), coaxial, data, telephone, LAN and electric wires.
Х-ка 4Appropriate design of the blades and flexible configuration of stripping tool ensures, that insulation layer of cable is correctly removed, without damaging any internal veins of a wire.
Х-ка 2Lanberg's wire stripper NT-0103 primary application is to remove insulation from STP/UTP LAN, computer, audio, SPT-1 / SPT-2 or any other cables.
